Hardwood floors are one of the most reliable, and good looking choices when it comes to flooring. eg Hardwood Flooring, But when your hardwood floors get stained, this can ruin the beautiful glossy surface that hardwood floors are so well known for. The process of removing stains from hardwood floors can be simple, or it can be as complicated as sanding and refinishing the entire surface.

In order to determine the method that you will have to use to restore your hardwood floors, you will have to first determine the condition of your floor, the nature of the stain, as well as how long the stain has been on the floor.

Firstly, you need to assess the condition of your floor. If the floor is relatively new and well sealed, then your stain may have only reached the surface level and not penetrated down to the wood. If this is the case, then a chemical treatment will do the trick.

If your floor is old and the urethane sealing has chipped, cracked, or simply worn down and the stain has penetrated underneath you may need to strip the floors, sand, and then refinish them. A good resource to learn more is swedishhouses.com/.

Next you will want to determine the nature of the stain, if the stain has been caused by a non greasy food product or alcohol, then you can use a mixture of dish detergent in a bucket of warm water. Only use a couple of drops of the dish detergent to approximately two gallons of water and wet a cloth with the mixture, and gently rub the stain until it disappears.

For stains that were caused by blood or grease, mix cold water with a couple of teaspoons of ammonia to remove them. Take a rag and gently rub the stains until they go away. If the stain still doesn’t go away, then sit the saturated rag on top of the stain until it vanishes.

For fresh urine stains, use scouring powder and hot water on a cloth, and scrub until the stain goes away. If, on the other hand, the stain has been there for a while, you should use a completely different approach. For urine stains that are old, mix bleach with your hot water in a ratio of one part bleach to ten parts hot water and wash the stain until it is no more.  Hopefully you with these methods, you will be well on your way to a glistening hardwood floor again.